How to Factory Reset Motorola Phone without Password

If you have no clue about resetting your Motorola phone to its factory settings without having the password, here's how to perform a Motorola hard reset without a password, pattern, or PIN.

The average Motorola user sets up a screen lock onto their Motorola with password. This can secure the device's sensitive data and stop someone from unauthorized access. But sometimes, it will also protect your data from your own prying eyes.

If you don't remember your Motorola password, the device will refuse to unlock and lock you out. The only answer to this dilemma is to do a factory reset—also called hard reset—to remove the lock screen. A factory reset wipes the device back to its original factory state so you can start fresh, but it also erases everything stored on the phone. If your photos, messages, call history, apps and settings haven't been backed up to your Google account, they will be gone forever after the reset.

Let's take a look at how to factory reset Motorola phone without password using different ways. If you're looking for something simple and fast, check out Higospot Android Unlocker, which combines an intuitive user interface with a power screen unlocking tool. Via this mix, it makes it easy for Android users to unlock their devices, not just Motorola.

Table of Contents

• What's the best way to factory reset a Motorola without password?
• General steps of Recovery Mode factory reset for Motorola phones
• Use a dedicated Android Unlocker tool
• How to reset Motorola without password via Google Find Hub

What's the best way to factory reset a Motorola without password?

It depends on the setup of your device. The most reliable way to perform a factory reset on Motorola phone, regardless of the model of version, is through the phone's built-in Recovery mode. If that isn't available, the next option is use a dedicated Android unlocking tool to erase and reset the phone. If neither option works, try to remember whether your Motorola phone is registered with a Google account and online. If yes, Google's Find Hub can remotely wipe the phone.

Each method erases all local data and may trigger Factory Reset Protection (FRP), so choose the approach that matches you needs.

General steps of Recovery Mode factory reset for Motorola phones

Using Recovery Mode is the standard, built-in method to factory reset a Motorola phone without password. It works across most models and is straightforward: power off, enter Bootloader, choose Recovery, select Wipe data/factory reset, and then reboot.

Here's how to reset Motorola phone without password in details. These steps cover most Motorola phones, including Moto G series, Moto E, Moto Z, Moto One, and many others.

Typically, performing Motorola factory reset without password will erase all internal data and return the device to factory settings.

Prepare before you reset:

• Back up what you can: If the phone is previously set to back up automatically (when it's idle, charging, and connected to Wi-Fi), back up contacts, call history, photos, SMS messages, Apps and their data to Google Drive.
• Charge the phone: Ensure battery is at least 50% to prevent power loss during the factory reset.
• Know your Google account credentials: If the phone was signed into a Google account, locate the email and password used on the device; they may be required after the reset for FRP.
• Remove external storage: Take out any microSD card to avoid accidentally formatting it.

Steps to factory reset Motorola without password:

1. Hold the Power button and choose Power off to turn the phone off completely.

2. Enter Bootloader / Recovery Mode:

Press and hold Volume Down and Power buttons simultaneously for about 5–10 seconds, then release both when the Bootloader menu appears. (For some models, press Volume Up + Power or a sequence of Volume Down then Volume Up; consult your model's quick guide if the standard sequence doesn't work.)

Once in the Bootloader menu, use the Volume buttons to navigate to Recovery mode, then press the Power button to select.

3. If you see the Android robot with a red exclamation or "No command," press and hold Power, then press Volume Up once to enter the Recovery menu.

4. Perform the factory reset:

Use the Volume buttons to highlight Wipe data/factory reset, then press Power to select.

Confirm by choosing Yes or Factory data reset and press Power to proceed.

5. Wait while the device erases data; this may take several minutes.

6. After the reset completes, choose Reboot system now and press Power.

The phone will restart and boot into the initial setup wizard. Follow the prompts to set your Motorola phone up again. It may require the original Google account credentials to activate the device. If you cannot, the phone will remain locked and you will not be able to complete setup.

Forgot the Google credentials? Try account recovery at Google's account recovery page using the original email.

Model-specific notes and variations:

• Moto G series: Bootloader entry is usually Volume Down + Power. Recovery menu sometimes needs an extra Power + Volume Up press when the Android robot shows.
• Moto E and lower-end models: Same general method; older models may show different menu wording such as Erase user data.
• Moto Z and modular phones: Bootloader entry is Volume Down + Power; modular accessories should be removed before starting.
• Motorola One / Android One models: Identical Recovery Mode flow; FRP is strictly enforced on Android One devices.
• If the standard method doesn't work: Try powering down, connecting the phone to a PC with a USB cable, then using Volume Down + Power; on some devices, being connected to USB can alter boot behavior.

If Recovery Mode isn't accessible to factory reset your Motorola phone without password, worry not. There are a few other options to help you out.

Use a dedicated Android Unlocker tool

Another practical, maybe the easiest way, to factory reset Motorola phone without password is using the aptly named Higospot Android Unlocker. It's a great tool that provides easy-to-follow wizard for unlocking Android phones and tablets when you've forgotten PIN, password, or pattern.

Win Download

1. Once installed, open Android Unlocker and select "Remove Screen Password" from its interface. For those who want to get past the FRP lock on an Android device, click the "Bypass Google FRP Lock" module there.

2. Android Unlocker's menu allows you to choose exactly what device manufacturer you'll need a factory reset on. In our case, select "Motorola."

3. Plug your Motorola device into the computer with a cable.

4. Click the green "Remove Now" button.

That's all there is to it! Wait for the factory reset process to complete. After it's done, the software will say that the phone is reset successfully.

How to reset Motorola without password via Google Find Hub

A remote erase from Google's Find Hub can wipe your Motorola phone and return it to factory settings when the device is linked to an accessible Google account and has internet access.

Google Find Hub is a service that help Android users locate, secure, or erase a lost Android device, accessory, or tracker.

Step-by-step: factory reset Motorola without password with Google Find Hub

1. On a computer or another phone, open a browser and go to Google Find Hub webpage and sign in with the Google account linked to the locked Motorola phone.

2. Select the Motorola phone from the device list; confirm you've chosen the correct device.

3. Choose the Factory reset device option and follow prompts to confirm the reset. The command will be sent to the phone if it is online. Here we take a Google Pixel as example. You should see a similar screen.

4. Wait for the erase to complete on the device.

When finished, the phone will reboot to its initial setup screen. Be prepared to sign in with the Google account previously used on the phone if prompted.

Note: If the Motorola phone is offline or not linked to your Google account, turn to use the recovery-mode hard reset or Higospot Android Unlocker mentioned in this article as an alternative.